The genuine drvinst.exe file is a software component of Microsoft Windows or HighPoint RAID Management by Microsoft or HighPoint Technologies. “DrvInst.exe” installs device driver software to communicate between a hardware device (such as a disk drive, printer, speaker, or mouse) and the computer operating system or an application. The version of Microsoft in “C:\Windows\System32” (and also in “C:\Windows\SysWOW64” on 64-bit systems) installs drivers for any device.

HighPoint Technologies also has the process “DrvInst.exe” found in “C:\Program Files\highpoint technologies, inc\highpoint raid management“, which only loads drivers for disk devices for use in a RAID. The RAID concept was first chosen in 1988 by three UC-Berkeley engineers at the SIGMOD conference to bring together less expensive personal computer disk drives better than high-end host drives. Since 1998, RAID controller chipsets manufactured by HighPoint Technologies, based in Milpitas, CA, USA, with offices in Taiwan, Beijing and Nanjing, have been standard on many PC motherboards.

Known file sizes on Windows 10/8/7 / XP are 160,208 Kb, 1,060,864 bytes, 1,019,904 bytes, 1,249,280 bytes or 1,024,000 bytes.

Fix Drvinst.exe Crash

To fix the Drvinst.exe crash, download Asmwsoft PC Optimizer and install it on your computer. To fix the error, follow the steps below.

Clean junk files to end the Drvinst.exe working error.

• Run the Asmwsoft PC Optimizer application.
• Then select “Clean Junk Files” from the main window.
• When the new window appears, click the “Start” button and wait for the search to end.
• Then click the “Select All” button.
• Click the “Start Cleaning” button.

Delete the registration to fix it to end the Drvinst.exe working error.

• Run the Asmwsoft PC Optimizer application.
• Then select “Fix Registry problems” from the main window.
• Click the “Select all” button to search all save locations for the error.
• Click the “Start” button and wait a moment depending on your recording file size.
• When the search is complete, click the “Select all” button.
• Click the “Fix selected” button.

Note: You may need to restart these steps.

Configure Windows to fix Drvinst.exe crashes. To do this, follow the steps below.

• Right-click on my computer from your desktop and select properties.
• Select “Advanced system settings” from the left menu.
• Click the Settings button in the Performance section.
• Click the “Data Execution Prevention” tab.
• Select the “Turn on DEP for all programs and services ….” option.
• Click the “Add…” button and select the drvinst.exe file and click the “Open” button.
• Click the “Ok” button and restart your computer.